Let's look at the nuances of each type of material.

[zihadhosenjm40]

To install supports for the gate, it is better to buy profile pipes of a larger cross-section - 60*60 mm with a wall thickness of 3 mm.

On sites with sharp elevation changes and marshy areas, pipes are replaced with screw piles.

What to make the frame from
When installing a fence at a summer house, the owners' priority is not only a long service life, but also minimal costs for construction work.

For permanent fences in the private sector, owners choose a poland mobile database frame, and around small areas of land - a wooden one.


Rolled metal products (profile pipe)
In combination with corrugated sheet, this option is the most optimal. The fence will be reliable, resistant to wind loads. Such a frame can be installed on estates at an angle, on uneven terrain.

Welding is used to connect the elements. The sheets are screwed to the frame with screws or rivets.

Before assembling all metal parts into one structure, it is recommended to treat them with an anti-corrosion primer and paint them.

For the choice of product and a description of the technology, read the article: “Methods for painting a metal fence.”

Wooden (from timber)
An inexpensive option is to install a timber frame. It is a lattice. The joists are fixed crosswise to the vertically fixed posts. This is done with nails, screws or a groove joint.