What is a chamfer on laminate

[zihadhosenjm40]

Due to the simple method of laying, laminate is one of the most popular floor coverings. Laminate with a chamfer looks like a natural board and has significant advantages over regular laminate. In order to lay chamfered lamellas with high quality, you need to know the specifics of this material, as well as the methods of laying and installation. This will help a photo diagram of how to properly lay chamfered laminate.

Laminate with a chamfer, unlike the classic one, has a costa rica mobile database straight edge. It differs both in appearance and in performance characteristics. You can choose a covering of different shapes, sizes and cutting depths. There are panels with two and four chamfers. In a two-chamfer board, only the opposite edges are beveled, and in a four-chamfer board, they are processed along the entire perimeter. Chamfers also differ in the type of corner cut. The cut can be figured and straight.

IMPORTANT! The most universal covering, suitable for any space, is considered to be laminate with four chamfers. Laying is allowed in almost any direction.

Advantages and disadvantages
The following significant advantages of this product can be highlighted:

Improved design. Externally, it is very similar to natural wood, which gives almost unlimited possibilities in terms of choosing the design of the room. Laminate can imitate the structure of almost any wood.
The chamfer covers the joint of the panels, so the seam of their connection is not visible. This is especially important during high humidity and changing seasons.
Durability. With proper installation, the service life of the coating is about 10 years.
Increased strength. The top layer of the panel has a greater thickness, which is necessary to form a bevel.
Joint protection. The beveled edge is treated with a special compound that increases the strength of the product.
It is possible to lay on uneven surfaces within moderate limits.
Among the disadvantages, one can highlight the much higher cost compared to regular laminate. There is also a controversial opinion that dirt can accumulate in the holes between the boards.