How to level walls for wallpaper with putty

[zihadhosenjm40]

Attention! Gypsum plaster mixes harden very quickly, so they should be prepared in small quantities and used very quickly.

To level the walls, use regular plasters.

The well-known putty has long been used to eliminate shareholder data defects on technical surfaces, including when preparing walls for wallpapering.

It is usually used in cases where there are minor damages, roughness, cracks, chips that can be eliminated by applying a small amount of the mixture. In this case, it can be in dry and liquid (paste-like) form. In the first case, it is necessary to prepare a solution in accordance with the instructions, in the second, the product is ready for use.

Putty is usually used to eliminate small irregularities.

The technology of working with putty is not complicated, but it requires accuracy and patience: you need to collect a small amount of material and quickly and carefully fill in the unevenness. But before you start puttying, you will have to:

clean the wall from dust and dirt;
apply an antibacterial compound;
Prime it, then apply the putty mixture to the problem areas, using large and small spatulas. The excess must be removed immediately, otherwise it will dry very quickly, and it will be much more difficult to get rid of it.

If the defects are large, several layers of putty will need to be applied; to ensure that they hold better, experts recommend placing a special mesh (tape) between them.

After completing the work and the composition has completely dried, the surface must be carefully sanded and then coated with primer again.