How to clean the seams between tiles
Posted: Thu Feb 06, 2025 4:31 am
Bura
White antiseptic powder also helps kill mold in the bathroom. Mix a glass of borax with a liter of water. Treat moldy areas, leave for a while. Rinse the solution off the surfaces.
Fungal spores thrive in the joints between tiles. How to remove mold in this case.
Ammonia solution
To clean the seams between tiles in the bathroom, try bolivia mobile databasea solution with ammonia. Dilute it with water in equal proportions, apply with a sponge or cloth. Wait until the stripes between the tiles turn white, rinse well.
Hydrogen peroxide also helps to get rid of black mold on tile joints. Apply the product to the areas that require treatment. Wash off after fifteen minutes. Be careful, the product will change the color of many materials if it gets on them.
Other substances
Peroxide, hydrogen peroxide from mold works well in combination with other substances: take 1/4 cup of boric acid, half a cup of vinegar and the same amount of hydrogen peroxide. Mix with a glass of water. Apply to moldy areas and also wait for some time.
Mechanical method
If the above methods do not help, use the mechanical method. Take a sharp object and clean all the seams well. Do not damage the edges of the tiles. Pour vinegar into the holes between the tiles, dry completely. Dilute new grout and cover the seams. After a day, you can apply a primer with anti-mold additives to the grout. It can be purchased at hardware stores.
Be sure to also wash all the tiles well. How to clean tiles? Very easy, with the same products: bleach diluted with water, or a vinegar-water solution.
White antiseptic powder also helps kill mold in the bathroom. Mix a glass of borax with a liter of water. Treat moldy areas, leave for a while. Rinse the solution off the surfaces.
Fungal spores thrive in the joints between tiles. How to remove mold in this case.
Ammonia solution
To clean the seams between tiles in the bathroom, try bolivia mobile databasea solution with ammonia. Dilute it with water in equal proportions, apply with a sponge or cloth. Wait until the stripes between the tiles turn white, rinse well.
Hydrogen peroxide also helps to get rid of black mold on tile joints. Apply the product to the areas that require treatment. Wash off after fifteen minutes. Be careful, the product will change the color of many materials if it gets on them.
Other substances
Peroxide, hydrogen peroxide from mold works well in combination with other substances: take 1/4 cup of boric acid, half a cup of vinegar and the same amount of hydrogen peroxide. Mix with a glass of water. Apply to moldy areas and also wait for some time.
Mechanical method
If the above methods do not help, use the mechanical method. Take a sharp object and clean all the seams well. Do not damage the edges of the tiles. Pour vinegar into the holes between the tiles, dry completely. Dilute new grout and cover the seams. After a day, you can apply a primer with anti-mold additives to the grout. It can be purchased at hardware stores.
Be sure to also wash all the tiles well. How to clean tiles? Very easy, with the same products: bleach diluted with water, or a vinegar-water solution.