To prepare the base for the covering,

[zihadhosenjm40]

To give the structure rigidity, the timber supports are connected to each other with horizontal joists. If necessary, the space is filled with additional elements. One of the most important factors when installing supports is strict vertical installation. Otherwise, the structure will be slanted, which will lead to its rapid destruction. The distance between supports should not exceed 1.5-1.7 m.

load-bearing beams are installed on the posts with one end and albania mobile database other in the holes in the wall of the house. Their depth should be at least 10 cm. Wooden structures are connected with bolts or metal brackets. In order for the roof of the canopy to be even along its entire length and not to have a sag, first the beams are laid on the posts along the edges of the structure, and then the rest along the cord.



After the installation of the supporting elements, the roof lathing is made from edged boards. A layer of waterproofing is laid on top and the roofing material is attached. In most cases, metal tiles or corrugated sheets are used for single-pitched canopies. The sheets must be adjusted so that water does not flow under them. This type of roof can withstand heavy snow loads. The canopy is equipped with a drain to drain moisture from the foundation of the house.

It is advisable to locate the entrance to the basement of a private house outside. This placement will not only keep the room warm, but will also prevent specific odors from spreading. The shape and size of the canopy (awning) over the entrance to the cellar depend entirely on the owner's choice.

However, the main requirement must be met: the device must effectively protect the cellar from water and fit into the exterior of the house. A durable and strong roofing covering should be used to ensure the reliability of the canopy under heavy wind and snow loads.

Materials for making the frame should be selected taking into account the ease of processing and construction of the canopy with your own hands.