Applying paint to the surface

[zihadhosenjm40]

A dry mixture of mineral paint is considered ready for use if its composition is diluted with a solvent. It is diluted with liquid. Cement, casein, and silicate are used for dilution.

Casein dye is used for mineral facades and interior wall cladding.
Brick, plaster, concrete are covered with liquid glass or qatar mobile database mineral paint. A film is formed on the surface.
For interior decoration, to embody artistic ideas, gouache or decorative dyes are used. They are diluted with liquid. The surface is covered with a durable matte film.
Mineral compositions are able to improve the appearance of the facade. They are often used in restoration work, which extends the service life of a brick or concrete facade of a house located in a damp area.

Mineral KM is used for interior cladding. It is a protective material for wood and metal.

Before painting, the walls are prepared using the same technology as for other paints and varnishes.

Dust and dirt are cleaned from the surface. Restoration begins with the removal of peeling fragments.
Problem areas are filled with putty.
The walls are tested for strength. The tape is pressed against the surface. If it is clean after removal, the primer can be applied. Otherwise, the wall is first strengthened.
The primer composition is selected according to the type of paint solvent. It is responsible for the uniformity of the KM coating at the finish.
Important: do not apply paint to the façade on a non-dried plaster layer. The average waiting time is 30 days. This does not apply if painting is done on such plaster. It is still covered with a protective coating on top.

The paint is applied twice. Each layer is superimposed on the dry previous one.